MULTILIFT XR S - Loading of Rear Heavy Flatrack;Body; Unloading of a Rear Heavy Flatrack;Body; Loading of a Front Heavy Container

XR21S59 CHU 79
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
A1
FLAT
A2
TIP
A3
ISO
A4
STO
A5
MAN
A6
URB
Loading of rear heavy atrack/body
A atrack/body loaded more heavily at the rear end can cause the truck front
wheels to be lifted of the ground. Be extra cautious when this happens.
When the atrack/body is on rear rollers, move the hook arm forward before
lowering the middle frame on the sub-frame. Otherwise there is a danger of
the atrack/body becoming loose from the hook.
Note: When the middle frame is coming down to oating
area, there is a risk that the rear frame jumps up. If this
happens the system stops and d012 can be seen in the
display. Move the sliding arm slowly more forwards or
backwards to get the rear frame down.
Unloading of a rear heavy atrack/body
When unloading a long or rear heavy atrack/body to the ground, move the
hook arm forward before the atrack/body touches the ground. Otherwise
there is a danger of the atrack/body becoming loose from the hook.
Loading of a front heavy container
When loading a too front heavy container it might happen, that the equipment
is not strong enough to carry out the loading, although the total weight of the
container and the load would not exceed the maximum allowed. In this case
move the load closer to the centre of the container, if possible.