MULTILIFT XR S - Before Driving Away

XR21S59 CHU 30
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
Before driving away
Before you drive o󰀨, always check the following:
• Hydraulic body locks must be closed; signal light on the control unit must no
longer be lit. The locking hooks must be tight on the atrack/body, i.e. on the
lower ange of the atrack/body frame beams or in the specic notches (if
provided). Check this on both sides of the truck.
• PTO must be disengaged.
• Check that the atrack/body doors are closed.
• Check that the load is secured and covered.
• All red atrack/body signal lights on the control unit / instrument panel must be
out.
• If a signal light on the control unit does not go out when the body locking
system is locked, there is a malfunction which must be corrected immediately.
• When there is no atrack/body mounted, the XR S hooklift equipment must be
positioned in its transport position on the sub-frame both during driving and
parking. Never drive the truck with the hooklift in any position other than the
transport position.
Driving with main cylinders in some other position than transport, will damage
the XR S equipment and/or main cylinders (leaks). Drive speed with the
hooklift in the before mentioned position must not exceed 30 km/h.