XR21S59 CHU 168
1/2018
113813003
Hooklift Multilift XR21S59 CHU
Service Manual
If the work has to be done on top of the equipment, note and prevent the risk of falling.
All ladders, working platforms etc. must be kept clean from oil and grease.
Fasten and tighten all removed components and screw joints after the service.
Dispose of all extra material and oil in an appropriate manner, noting all environmental
rules and regulations.
Before commencing any service or repair work, ensure that the vehicle is standing on an
even surface with the hand brake engaged.
Remember to follow appropriate work safety and environmental instructions.
Record all service and repair work and any special matters which have appeared during
the job.
Service table
Daily
1.1 Check the safety functions
1.2 Check for possible damages and oil leaks
1.3 Check the control and warning lights
1.4 Check the function of the control unit
1.5 Check the load lockings
To Next Page
Loading...