XR21S59 CHU 143
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
1. Attach the left ratchet to the liftframe.
2. Extract the locking shafts on the lower parts of the liftframe using the crowbar if
necessary. Turn the axis on both sides of the equipment to 180° temporary
STOWED position (lock plates vertical), note leave the whole pin
extracted so the liftframe can move in front of the stowage.
3. Move the bottom part of the liftframe forward while controlling it with the LH ratchet.
4. Turn the locking shafts on the bottom parts of the liftframe to their STOWED
position (lock plates vertical).
5. Attach the right ratchet to the liftframe. Move the bottom part of the liftframe forward,
if needed and fasten both ratchets.
To Next Page
Loading...