MULTILIFT XR S - Page 37

XR21S59 CHU 37
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
CXXX / dXXX
>>>>>>>>
M
A
M
Safety codes
6A. If it seems impossible to select the mode and code ”d019” is displayed on the
control unit, make sure that the attachment joints of the liftframe ratchets
are attached to the stowage.
6B. Select manual mode A5 in case the horizontal movement has been driven
to the stow/unstow position, in front of the atrack/body home position.
- push the A5 button for approx. 2 s.
- push the rearmost button in the bottom row on the either side of the control unit
- horizontal movement slides backwards (cylinder in)
- stop the horizontal movement after it has moved at least 350 mm backwards
7. Open the body locks
- push the ”bodylocks open” button
- “locks not closed” signal light on the
control unit is lit, when the locks are
fully open.
7. Opening body locks
- move the control lever slowly
backwards
- the body locks open
- “locks not closed” signal light on
the control unit is lit, when the
locks are fully open.