MULTILIFT XR S - Page 69

XR21S59 CHU 69
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
M
M
A
A
10. Drive the middle frame back
- drive the middle frame back
by moving the control lever back
(main cylinders out).
- ”frame not down” signal light is lit,
when the middle frame is lifted o󰀨
the subframe.
10. Middle frame back
- keep the control lever in rear
position. (main cylinders out).
- ”frame not down” signal light is lit,
  whenthemiddleframeisliftedo
the subframe.
12. Drive the middle frame backwards,
open the safety lock of the gripping
hook and release the hook from the
atrack/body gripping bar
1 - drive the middle frame back
by keeping the control lever
back (main cylinders out)
2 - open the safety lock of the
gripping hook by pressing button
A or B on the control unit
immediately before lowering the
front end of the atrack/body to
the ground
3 - continue the downward motion
of the main cylinders, with
the safety lock open, until the
hook is released from the
gripping bar
4 - stop the movement by releasing
the control lever.
12. Middle frame backwards, open the
safety lock of the gripping hook
and release the hook from the
atrack/body gripping bar
1 - keep the control lever in rear
position (main cylinders out).
2 - open the safety lock of the
gripping hook by pressing
button A or B on the control unit
immediately before lowering the
   frontendoftheatrack/bodyto
the ground
3 - continue the downward motion
of the main cylinders, with
the safety lock open, until the
hook is released from the
gripping bar
4 - stop the movement by releasing
the control lever.
11. Release the parking brake when the atrack/body rear end touches the
ground.
Only in case the truck is on uphill slope, you may not release the hand brake, as
in that case the truck and the atrack/body would move backwards.