Configuration/settings
User manual 55170_hdb_en_13 101 / 145
Reset to factory
settings - delete I&M
data
The Reset to factory settings - Delete I&M data function resets the module
to the factory settings and, at the same time, deletes the I&M data stored in
memory.
Proceed as follows:
Click Connect online in the TIA portal.
After connection, mark the module in question.
Open the IMPACT67 module in project navigation. Double-click Online &
Diagnostics.
Below the Functions tab, click Reset to factory settings to open a
window.
Activate the Delete I&M data menu option.
Press the Reset button.
The module is reset to its factory settings.
To Next Page
Loading...
