You can find the Transport and Tempo controls in the Header:
Transport and tempo controls in KOMPLETE KONTROL.
(1) Play button: Starts and stops the internal clock. This can be used to control the playback of
sequenced KONTAKT and REAKTOR Instruments.
(2) Reset button: Resets the internal clock to its start position. Consequently, sequencers in KON-
TAKT and REAKTOR Instruments will start their playback from the beginning. The same applies to
the Arpeggiator.
(3) Tempo control: Sets the tempo in BPM (beats per minute).
When using KOMPLETE KONTROL as a plug-in, it is automatically synchronized to
the host. Therefore the Transport and Tempo controls are grayed out and inactive.
7.3.1. Resetting the Clock
You can reset the clock in the software and from the keyboard.
Resetting the Clock in the Software
When the internal clock is stopped:
1. Click the Reset button to reset the internal clock.
2. Click the Play button to start playback from the beginning.
When the internal clock is running:
• Click the Reset button to reset the internal clock and to resume playback from the beginning.
Resetting the Clock from the Keyboard
When the internal clock is stopped:
1. Press STOP to reset the internal clock.
2. Press PLAY (Restart) to start playback from the beginning.
When the internal clock is stopped:
Global Controls and Preferences
34
To Next Page
Loading...
Need help?
General
