►
Press the SHIFT + GRID (REC MODE) button to enter Record mode.
→
The Record mode on-screen overlay appears and you can use the Encoder and D-pad to
navigate the on–screen overlay and make your settings.
The following table describes each of the parameters in the Record mode on-screen overlay.
Element
Description
METRONOME
Level The metronome marks time at a selected rate by giving a regular
audible tick. This is useful to have in the background in order to
keep time when recording. The METRONOME Level parameter
adjusts the volume of the metronome. The level range is from -inf
(infinity) to 10.0 dB.
Time Set the note value on which the metronome is heard. The available
time divisions are: 1/4, 1/8, 1/16, 1/4T, 1/8T, 1/16T.
Auto-On The metronome provides an Auto-Enable option allowing the
metronome turn on automatically when you start recording a Pattern:
If it is set to Rec then the metronome is always heard when record is
enabled. If set to Off then enabling/disabling Recording has no effect
on the metronome on/off state.
COUNT-IN
Length Adjusts the duration of the Count-in, i.e. how long the metronome
will sound before the recording actually starts. The count-in length
can be set to; 1 Bar, 2 Bars, and 4 Bars.
QUANTIZE
Recording and Editing Patterns
Setting Recording Options
MASCHINE JAM - Manual - 75
To Next Page
Loading...
Need help?
General
Weight and Dimensions
