Native Instruments Maschine MIKRO Getting Started

2. Press F1 to select PERF.
At the bottom of the display you see the current Scene Sync value. The default value
SCENE means that the next time you select a new Scene or loop range, the switch will
happen once the current Scene has played to the end.
3. Turn the Control knob to select the desired value, for example 1/4 (quarter note).
→
The next time you select a new Scene or loop range, the switch will happen on the next
quarter note.
To adjust the Retrigger setting:
1. Press and hold SCENE to enter Scene mode (or pin it by pressing SCENE + MAIN).
2. Press the Arrow Right button until 3/3: RETRIGGER is displayed.
At the bottom of the display you see the current Retrigger value (OFF by default).
3. Turn the Control knob to select ON.
→
The next time you select a new Scene or loop range, it will start from the beginning.
Creating a Song Using Scenes
Using Scenes to Play Live
MASCHINE MIKRO - Getting Started - 126

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English