Native Instruments Maschine MIKRO Getting Started

For some of these modes, you need to hold the button to keep the mode active. For example,
when you press the PAD MODE button, the displays will show pad-specific control options;
when you release it, the controller switches back to Control mode.
The buttons that are required to be held are in the middle column of your controller (left of the
pads) along with the NOTE REPEAT button and the GRID button:
Each of these buttons needs to be held depressed in order to use the corresponding mode.
Pinning the Controller Modes
You can also pin (i.e. lock) controller modes, so the controller doesn’t switch back when releas-
ing a mode button:
1. Press and hold a controller mode button, e.g., VIEW.
2. Press the MAIN button.
Quick Reference
Using Your MASCHINE Controller
MASCHINE MIKRO - Getting Started - 149

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English