Native Instruments Maschine MIKRO Getting Started

→
You can release the VIEW button: The controller will remain in View mode until you press
VIEW again.
Once a mode has been pinned your controller will automatically pin the mode next time
it is pressed.
You can unpin any mode by pressing its button together with MAIN again.
See section Pinning the Scene Mode for an example of use. For more detailed informa-
tion on controller modes, please refer to the Manual.
Navigating the MASCHINE MIKRO Controller Display
The buttons above and below the display, along with the Control encoder (on the right), have
functions relating to what is shown on the display:
The control elements around the display.
▪ Depending on what is shown on the display, some of the buttons might be inactive — in
that case they are off. The active buttons (i.e. those that would do something if you would
press them) are always half-lit or fully lit.
Quick Reference
Using Your MASCHINE Controller
MASCHINE MIKRO - Getting Started - 150

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English