77
BROWSE CONSISTS (Shortcut = PROG 9)
This option lets you see what advanced consists are currently in the memory of the
system.
Press ENTER at the “BROWSE CONSISTS” prompt. The LCD will display the highest
numbered consist in the system memory. It will look something like:
CON: 127 10:42AMCON: 127 10:42AM
CON: 127 10:42AMCON: 127 10:42AM
CON: 127 10:42AM
LEAD:2190 R:4484LEAD:2190 R:4484
LEAD:2190 R:4484LEAD:2190 R:4484
LEAD:2190 R:4484
Use the speed buttons or thumbwheel to scroll the next higher or lower consist in the list.
When you get to the end of the list it will roll over to the ‘other’ end. Pressing ENTER will
show any mid consist locomotives of the displayed consist.
Pressing ENTER while the Lead/Rear locomotives are displayed will show any mid-
consist locomotives. (The system will remember up to 4 mid-consist locos per advanced
consist). Press ENTER again to view the next consist.
Pressing SEL LOCO will exit browsing and select the displayed consist for running.
Pressing CLEAR then pressing 1 at the “KILL CON?” prompt will kill the displayed
consist.
Press PROG/ESC at any time to exit browsing.
To Next Page
Loading...
