4-63
When you click [Default], default values for SMTP port number, retry count, and retry interval appear. Unless there is any
specific reason not to, it is recommended to use the default values.
1
Specify information to be included in the body of alert mails.
Product Information The product name, code and number of the server
IP Address IP address of BMC
Event Time The time the event occurred
SEL Dump Data Data representing system event logs (SEL) in hexadecimal
BMC URL URL of the ARMC login page
BMC FQDN Full domain name of BMC
LCD Message LCD message in the server at the time of event occurrence
BMC FW Rev. Revision information of BMC firmware/SDR/PIA
2
The information here will appear in the Date field in the header of alert mails.
1
2
To Next Page
Loading...
