9-7
NOTE: Confirm that the handle is hooked to the frame when having inserted the hard disk drive.
7. Install the front bezel that was removed
Removal
Take th o th the hard disk drive removed, insert the empty
drive carrier into the slot.
the system and press the POWER switch to turn off the power.
2. Unlock the hard disk drive.
in step 2.
e foll wing steps to remove the hard disk drive. To use the server wi
1. Shutdown
1
2
3. Firmly hold the additional hard disk drive and handle, and then take them out.
NOTE: If removing a failing hard disk of the hard drive, confirm the slot in which the DISK lamp
disk drive is amber before starting the removal.
To Next Page
Loading...
