9-32
4. Install the additional slot cove
IMPORTANT: To main
r on the slot from which you remove the PCI board, and then slowly close the tab.
tain the dust-proofing and electromagnetic radiation characteristics and
cooling performance of the server, be sure to install the blank plate on the slot from which you
removed the PCI board.
5. Reinstall the rear access cover
Hot Replace
Take the following procedure to execute t
1. Take the following steps to sto
IMPORTANT: Before removing a PCI board, be sure to stop the driver of the slot (containing
and place the server into the rack.
he Hot Replace:
p the device driver used by the Hot Plug PCI board you want to replace:
the PCI board) from the operating system. Failure to do so may cause the system to fail.
To stop the de
(1) Open [Ad
vice driver from the operating system window:
d/Remove Hardware] in [Control Panel].
Lock (for long card)
Tab
The [Add/Remove Hardware Wizard] starts.
(2) Click [Next].
To Next Page
Loading...
