4-8
Main
After entering SETUP, the Main menu appears first. To display a submenu, position the cursor on a selection that has a
submenu (preceded by the X symbol
) and press Enter.
The items which can be set on the Main menu screen and their functions are described below.
Option Parameter Description Your Setting
System Time HH:MM:SS Set the time.
System Date MM/DD/YYYY Set the date.
Legacy Floppy A [Disabled]
1.2MB 5 1/4"
720Kb 3 1/2"
1.44/1.25MB 3 1/2"
2.88MB 3 1/2"
Set the settings of floppy disk drive A.
Set to "Disabled" since the server does not support
drive A.
Legacy Floppy B [Disabled]
1.2MB 5 1/4"
720Kb 3 1/2"
1.44/1.25MB 3 1/2"
2.88MB 3 1/2"
Set the settings of floppy disk drive B.
Set to "Disabled" since the server does not support
drive B.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
Wait for the specified time until the first access to
the IDE device during POST.
Primary IDE Master/Primary
IDE Slave
–
Displays the information on the device connected to
each channel on the submenu.
(Display only)
Language [English (US)]
French
German
Spanish
Italian
Select the language used for SETUP.
[ ]: Factory-set
To Next Page
Loading...
