4-9
Processor Settings
Selecting "Processor Settings" on the Main menu shows the following submenu.
See the table below for the items.
Option Parameter Description Your Setting
Processor Retest [No]
Yes
Clears the error information on the processor.
Processor Speed
Setting
– Indicates the frequency of the processor.
Processor 1-4
CPUID
–
A numeral indicates the ID of processor. "Disabled" indicates that
the processor is defected by BMC.
"Not Installed" indicates that the processor is not installed.
(Display only)
Processor 1-4
L2 Cache Size
– Indicates the L2 cache of processor.
Processor 1-4
L3 Cache Size
–
Indicates the L3 cache size if the processor has L3 cache
memory.
Hyper-Threading
Technology
Disabled
[Enabled]
Setting this item to "Enabled" allows the hyper-threading
technology to be used in the ACPI mode. From operating system
that supports Hyper-Threading Technology feature, the specified
number of processors is twice as many as the actual number of
the installed processors. With Windows 2000 Server / Advanced
Server, the operation of hyper-threading technology is not
guaranteed.
Execute Disable
Bit
[Disabled]
Enabled
Disables or enables the Execute Disable Bit feature of the
processor.
Intel(R)
Virtualization
Technology
[Disabled]
Enabled
This menu appears only when the processor supports Intel®
Virtualization Technology.
Specify whether the Intel® Virtualization Technology is enabled
or disabled.
If the parameter is changed, the DC power of the system must
be turned off. Select [Exit] → [Exit Saving Changes] and restart
the system. Then, turn off the DC power on POST screen.
Echo TPR [Enabled]
Disabled
Specify whether Echo TPR is enabled or disabled.
This menu appears on N8110-1149F only.
[ ]: Factory-set
To Next Page
Loading...
