4-10
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
To display a submenu, position the cursor on a selection that has a submenu (preceded by the X symbol
) and press Enter.
See the table below for the items.
Option Parameter Description Your Setting
Boot-time
Diagnostic
Screen
[Disabled]
Enabled
Specify whether the self-diagnosis (POST) running screen is displayed or
not on boot.
If this item is set to "Disabled," the manufacturer logo appears during
POST. (Pressing Esc in the status causes the screen display to be
switched to the POST execution screen.
The Boot-time Diagnostic Screen is automatically enabled if the Console
Redirection is enabled.
Reset
Configuration
Data
[No]
Yes
Select "Yes" to clear the extended system configuration data area
(system information stored by POST). The parameter is changed to "No"
after the system is booted.
NumLock On
[Off]
Specify whether NumLock is enabled or disabled on boot.
Memory/
Processor Error
[Boot]
Halt
Indicates whether POST is paused once at the occurrence of a
processor or memory error during the execution of POST.
When processor error or Memory error is encountered, the utility is not
paused at the end of POST if this item is set to "Halt" and even though
"POST Error Pause" of "Server" menu is "Enabled".
[ ]: Factory-set
To Next Page
Loading...
