4-11
Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
DIMM Group
#1 - #8
Status
Normal
Not installed
Disabled
Indicates the current memory status.
"Normal" indicates that the memory devices operate normally.
"Disabled" indicates that one or more memory devices are defected.
"Not Installed" indicates that no memory devices are installed. (Display
only)
Memory
Retest
[No]
Yes
Clears the DIMM group error status information. Run this menu when the
failed DIMM(s) are replaced.
Extended
RAM Step
1MB
1KB
Every Location
[Disabled]
"1MB" indicates that the memory test is done in the unit of 1MB. "1KB"
indicates that the memory test is done in the unit of 1KB. "Every-Location"
indicates that every memory device is tested. "Disabled" indicates that
only memory initialization is done.
Online Spare
Memory
[Disabled]
Enabled
Select "Enabled" to enable the Online Spare Memory feature.
Memory RAS
Feature
[Normal]
Mirror
RAID
Set the memory configuration. Select "Mirror" to enable the memory
mirroring function. Select "RAID" to enable the memory RAID function.
Hot-Add
Memory
Support
[Disabled]
Enabled
Specify whether to use the Hot-Add Memory feature on Windows Server
2003 Enterprise Edition or Datacenter Edition. Select "Enabled" to use the
Hot-Add Memory feature.
[ ]: Factory-set
To Next Page
Loading...
