4-12
PCI Configuration
Selecting "PCI Configuration" on the Advanced menu shows the following screen. Selecting an item on the screen allows the
proper submenu to appear.
See the table blow for the items.
Option Parameter Description Your Setting
PCI Slot 1-9
Option ROM
[Enabled]
Disabled
Disables/enables the Option ROM BIOS on the PCI bus. When the
graphic accelerator board is installed or the disk array controller or
SCSI controller boards to be installed are connected to the hard disk
in which operating system is installed, set this item to "Enabled."
When the LAN controller board with installation of the option ROM
BIOS is used but the board does not provide network booting, set
this item to "Disabled."
[ ]: Factory-set
IMPORTANT: "PCI Slot x Option ROM" should be set to enable only when the PCI slot
accomodates a PCI card involved in the boot process, i.e. a SCSI or a RAID controller that
manages boot disks or a LAN board with Boot on LAN features…
To Next Page
Loading...
