NEC NC1600C - Factory Default Settings

“Confidential, Do Not Duplicate without written authorization from NEC.”
5-4
SERVICE MODE
Factory Default
Projector setup conditions are returned to the status of shipment from the factory.
1 M Key & Title
Macro Key registration and title initialization are carried out.
Macro Key registration and title are restored to the status of shipment from the factory.
Example of display
First line : Indication of "Factory Default"
Second line : Indication of "M Key & Title"
Third line : Void
Fourth line : Indication of "Execute"
2 All
The setting conditions are initialized. (Including Macro Key registration and Title)
The status of shipment from the factory is assumed.
However, lamp setting and network setting are not initialized.
Factory Default
M Key & Title
(*)
< Execute >
Example of display
First line : Indication of "Factory Default"
Second line : Indication of "All"
Third line : Void
Fourth line : Indication of "Execute"
Factory Default
All
(*)
< Execute >