NEC NC1600C - New Bulb Setup

“Confidential, Do Not Duplicate without written authorization from NEC.”
5-8
SERVICE MODE
2 Time setup
Example of display
Data/Time
Time
[ 16:27:33 ]
First line : Indication of "Date / Time"
Second line : Indication of "Time"
Third line : Void
Fourth line : Indication of time input (*1)
New Bulb
Used when the lamp bulb is replaced.
Lamp usage time reset, bulb type selection, and bulb entry selection are newly carried out.
1 Bulb Entry selection
Used when selecting the bulb type from the Bulb Entry already registered.
When a new bulb is selected, confirmation of "Air Filter" replacement and lamp Usage clear is made in the
screen.
Selection of a new bulb cannot be accomplished unless all items of "UsageClear OK?" are OK.
Example of display
New Bulb
Entry Select
(*)
[ Entry Name ]
First line : Indication of "New Bulb"
Second line : Indication of "Entry Select"
Third line : Indication of current setup
Fourth line : Indication of Entry Name already registered
(If no Entry is present, "(None)" is displayed.