NEC NC1600C - Page 144

“Confidential, Do Not Duplicate without written authorization from NEC.”
5-14
SERVICE MODE
New Lamp House
This function is used when the usage time of lamp house is controlled.
At the time of Lamp House replacement, Time Control Entry is selected to integrate the consumed time.
It is possible to carry out the resetting of Lamp House Usage Time, the integration mode, and the selection of
Lamp House.
1 Usage Clear
Lamp House Usage Time is cleared.
Single mode : Lamp House Usage Time is cleared to zero.
Multi-mode : Lamp House Usage Time for the selected House 1 or House 2 is cleared to zero.
Example of display
New Lamp house
Usage Clear
(*)
[ House ]
First line : Indication of "New Lamp House"
Second line : Indication of "Usage Clear"
Third line : Indication of current setup
Fourth line : Indication of Lamp House to be cleared
Single mode : House
Lamp 1 used in multi-mode : House 1
Lamp 2 used in multi-mode : House 2
• Popup Menu
Confirmation of Usage Clear
Example of display
**Usage Clear**
Are you sure?
< Yes >
****************
First line : Indication of "Usage Clear"
Second line : Indication of "Are you sure?"
Third line : Indication of "Yes / No"
Fourth line : Popup decoration