NEC NC1600C - Page 145

“Confidential, Do Not Duplicate without written authorization from NEC.”
5-15
SERVICE MODE
2 Usage Mode (Multi)
This function is used when the usage time is integrated while two lamp houses are used reciprocally.
When the lamp house is replaced, the integrated lamp house name is selected.
Example of display
Usage Mode
Multi
(*)
< Lamp house 1 >
First line : Indication of "Usage Mode"
Second line : Indication of "Multi"
Third line : Indication of current setup
Fourth line : Indication of Lamp House
Lamp 1 used in multi-mode: House 1
Lamp 2 used in multi-mode: House 2
3 Usage Mode (Single)
This function is selected when a single lamp house is used.
Example of display
New Lamp house
Usage Mode
(*)
< Single >
First line : Indication of "New Lamp House"
Second line : Indication of "Usage Mode"
Third line : Indication of current setup
Fourth line : Indication of "Single"