“Confidential, Do Not Duplicate without written authorization from NEC.”
7-13
ADJUSTMENTS AND INSPECTIONS ATTRIBUTABLE TO THE REPLECEMENT OF ELECTRICAL AND OPTICAL PARTS
CPU PWB exchange
CPU Board Firmware / Data Update
1. Preparation
Copy the Firmware and Data file in the Compact Flash memory in the procedures specified below.
1) Copy Firm(is16firm_v1xx.bin) in the “_pjfirm!” folder of the Compact Flash memory.
2) Copy Data(is16v1xx_factory.bin) in the “_pjdat!” folder of the Compact Flash memory.
Root
_pjfirm!
is16firm_v1xx.bin
_pjdat!
is16v1xx_factry.bin
3) Insert the Compact Flash memory in the PC-CARD slot.
To Next Page
Loading...
