NEC NC1600C - Page 31

25
3. Projection of Images (Basic Operation)
3-4-3. Fine adjustment of the size of the projected screen (Zoom)
1
Press the ZOOM +/- buttons while depressing the CTL (LENS) button on the control panel of your
projector as required.
• When controlling with the remote control, press the ZOOM +/- button while depressing the CTL (LENS) button.
3-4-4. Focusing the projected screen (Focus)
1
Press the FOCUS +/- buttons while depressing the CTL (LENS) button, on the control panel of
your projector as required.
• When controlling with the remote control, press the FOCUS +/- button while depressing the CTL (LENS) button.
3-4-5. Adjusting the brightness of the projected screen (Lamp output)
1
Press the LAMP +/- buttons while depressing the CTL (LAMP) button, on the control panel of your
projector as required.