NEC NEAX 2000 IPS - Page 463

– 447 – NWA-008841-001 Rev.5.0
90ch3003.fm
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE 4: These switch settings are valid only when MODE switch (Rotary SW) is set to 1 (Auto Negoti-
ation OFF).
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SW1 (Dip SW)
1
For normal operation
OFF Not used
2
For normal operation
OFF Not used
3
For normal operation
OFF Not used
4
ON AP No. 04-15
OFF AP No. 20-31
SW2 (Dip SW)
1
ON Ethernet 100 Mbps NOTE 4
OFF Ethernet 10 Mbps NOTE 4
2-5, 7 Not used
6
Dynamic Jitter Buffer
OFF Static Jitter Buffer
8
Nonlinear processor for echo canceller
is not used.
OFF
Nonlinear processor for echo canceller
is used.
1
2
3
4
ON
ON
ON
ON
1
2
3
4
5
6
7
8
ON
OFF
ON
ON
PN-IPTB (IPT)