NEC NEAX 2000 IPS - Page 72

CHAPTER 1 GENERAL INFORMATION
– 56 – NWA-008841-001 Rev.5.0
90ch1001.fm
Continued on next page
CARD NAME MOUNTING CONDITIONS
PN-32IPLA
PN-32IPLA-A
PN-16VCTA
PN-16VCTA-A
[For Series 3300 or later]
PN-32IPLA/PN-32IPLA-A (IP-PAD) card is to be mounted in the
LT01 and/or LT05 slots of PIM0-7.
• In the following cases, other L/T card and/or AP card can be
mounted in the adjoining left side slot of IP-PAD card.
• In the following cases, according as number of channels, do not
mount any other L/T cards in the LT08-LT11 slots when you mount
the IP-PAD card in the LT05 slot.
NOTE: For Backup CPU system, do not mount in the LT08-LT10
slots.
IP-PAD
CARD
16VCT
CARD
×: ALLOWED -: NOT ALLOWED
OTHER LINE/TRUNK
CARDS
APPLICATION PROCESSOR
CARDS
CHANNEL
NO.
SLOT
NO.
LT02 LT03 LT06 LT07 LT02 LT03 LT06 LT07
16 CH
LT01
NONE
×× ××
LT05 ×× ××
24 CH
LT01
NONE
- ×××
LT05 - ×××
32 CH
LT01
NONE
-- ××
LT05 - - ××
16 CH
LT01
ONE
CARD
- × - ×
LT05 - × - ×
24/32
CH
LT01
TWO
CARDS
-- --
LT05 -- --
IP-PAD
CARD
×: ALLOWED -: NOT ALLOWED
OTHER LINE/TRUNK
CARDS
APPLICATION PROCESSOR
CARDS
CHANNEL
NO.
SLOT
NO.
LT08 LT09 LT10
LT11
NOTE
LT08 LT09 LT10
LT11
NOTE
16 CH
LT0 5
--××××××
24 CH ---×××××
32 CH ----××××
JULY/1/2006
MOUNTING CONDITIONS OF CIRCUIT CARDS