NEC NEAX 2000 IPS - Page 73

CHAPTER 1 GENERAL INFORMATION
– 57 – NWA-008841-001 Rev.5.0
90ch1001.fm
Continued on next page
CARD NAME MOUNTING CONDITIONS
PN-8IPLA PN-8IPLA (IP-PAD) card is to be mounted in the LT00 and/or LT04
slots of PIM0-7.
• In the following cases, other L/T card and/or AP card can be
mounted in the adjoining left side slot of IP-PAD card.
• In the following cases, according as number of channels, do not
mount any other L/T cards in the LT08-LT11 slots when you mount
the IP-PAD card in the LT04 slot.
NOTE: For Backup CPU system, do not mount in the LT08-LT10
slots.
IP-PAD
CARD
24DSP
CARD
×: ALLOWED -: NOT ALLOWED
OTHER LINE/TRUNK
CARDS
APPLICATION PROCESSOR
CARDS
CHANNEL
NO.
SLOT
NO.
CHANNEL
NO.
LT
01
LT
02
LT
03
LT
05
LT
06
LT
07
LT
01
LT
02
LT
03
LT
05
LT
06
LT
07
8 CH
LT0 0
NONE
××× ×××
LT0 4 ××× ×××
16 CH
LT0 0
8 CH
- ×× ×××
LT0 4 - ×× ×××
24 CH
LT0 0
16 CH
--× ×××
LT0 4 - - × ×××
32 CH
LT0 0
24 CH
--- ×××
LT04 --- ×××
IP-PAD
CARD
24DSP
CARD
×: ALLOWED -: NOT ALLOWED
OTHER LINE/TRUNK
CARDS
APPLICATION PROCESSOR
CARDS
CHANNEL
NO.
SLOT
NO.
CHANNEL
NO.
LT08 LT09 LT10
LT11
NOTE
LT08 LT09 LT10
LT11
NOTE
8 CH
LT0 4
8 CH
- ×××××××
16 CH - - ××××××
24 CH 16 CH ---×××××
32 CH 24 CH ----××××
JULY/1/2006
MOUNTING CONDITIONS OF CIRCUIT CARDS