Issue 1.0 UNIVERGE SV8100
2 - 994 Station Name Assignment – User Programmable
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Operation
To program your extension name:
1. Press Speaker.
2. Dial 700.
- OR -
Press the Extension Name Change key (Program 15-07 or SC 751: 55).
3. Press Hold.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
Use to customize the extension
name programming used for
registration and setup.
MLT
(default = 700)
3
15-01-01 Basic Extension Data Setup –
Extension Name
Define the extension/virtual
extension name.
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
3
15-07-01 Programmable Function Keys Assign an Extension Name
Change key (55) to extensions.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
Turns Off (0) or On (1) an
extension user ability to program
its name.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
To Next Page
Loading...
