Issue 1.0 UNIVERGE SV8100
2 - 2 Features
SECTION 2 IMPORTANT NOTES
Simplifying Multiline Terminal Operation with One-Touch Keys
A multiline terminal user can access many features using Service Codes (e.g., Service
Code 744 sets Call Forward Busy/No Answer). To streamline the operation of their
telephone, a multiline terminal user can store these codes under One-Touch Keys.
This provides one-button operation for almost any feature. To find out more, turn to the
One-Touch Calling and One-Touch Serial Operation features.
Programmable Keys
When reading an instruction using programmable keys, you will see a notation similar
to (PRG 15-07 or SC nnn). This means that the key requires service code nnn, and you
can program this code in Program 15-07 or by dialing Service Code 751 or 752. Refer
to the Programmable Function Keys feature for more information.
Using Handsfree
The manual assumes each extension has Automatic Handsfree. This lets a user just
press a line key or Speaker key to answer or place a call. For extensions without
Automatic Handsfree, the user must:
Lift the handset or press Speaker for Intercom dial tone.
Lift the handset or press Speaker, then press a line key for trunk dial tone.
Port Assignments
Port Calculation for Trunks:
The system detects the type of blade (trunk or extension) and assigns the required
extension or trunk ports to the slot. The system will use the next available port numbers
– it will not reserve any ports.
To Next Page
Loading...
