NEC Univerge SV8100 - Table 2-18 License Information

Issue 1.0 UNIVERGE SV8100
2 - 690 Licensing
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-48-01 License Activation – Software
Key Code
20-digit character
(default not assigned)
3
10-48-02 License Activation – Activation
Code
8-digit hexadecimal
number
(default not assigned)
3
10-48-03 License Activation – Feature
Code
7-digit figure
(default not assigned)
3
10-49-01 License File Activation – Save
License File on USB Drive
Use to enable the command to
save the license file via USB
memory which is issued from the
license server.
Dial 1 + TRF
(Press TRF to cancel)
(default not assigned)
3
10-50-01 License Information – License
Name
Use to confirm license information
that is stored in a system.
(default not assigned)
3
10-50-02 License Information – License
Quantity
0~32767
(default not assigned)
3
10-50-03 License Information – Free
License Quantity
0~32767
(default not assigned)
3
10-50-04 License Information – Free
License Remaining Days
0~9999
(default not assigned)
3
10-52-01 Free/Demo License Information
– Remaining Days of Free/Demo
License
Use to display information on free
of charge/Demo license.
0~9999
(default not assigned)
3
Table 2-18 License Information
License Code License Name Reset Required Min Max Note
0001 712 Port Yes On/Off
0002 NetLink Yes 1 49
0007 Hotel/Motel
(PMS)
Yes On/Off
0008 SMDR On/Off