NEC Univerge SV8100 - Sip Extension Basic Information Setup

Issue 1.0 UNIVERGE SV8100
2 - 1314 Wireless DECT (SIP)
SIP Extension Basic Information Setup:
84-19-40 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (min)
Use this program to set the minimum
setting for the G.726 Jitter Buffer.
0~160 ms
(default = 30)
3
84-19-41 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Average)
Use this program to define the
average setting for the G.726 Jitter
Buffer.
0~160 ms
(default = 60)
3
84-19-42 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Max)
Use this setting to define the
maximum setting for the G.726 Jitter
Buffer
0~160 ms
(default = 120)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
84-20-01 SIP Extension Basic Information
Setup – Registrar/Proxy Port
Use this program to define SIP station
Proxy Port.
1~65535
(default = 5070)
3
84-20-02 SIP Extension Basic Information
Setup – Session Timer Value
Use this program to define the
periodic refresh time that allows both
user agents and proxies to determine
if the SIP session is still active.
0~65535
(default = 180)
3
84-20-03 SIP Extension Basic Information
Setup – Minimum Session Timer
Value
Use this program to define to convey
the minimum allowed value for the
SIP session timer.
0~65535
(default = 180)
3
84-20-04 SIP Extension Basic Information
Setup – Called Party Info
Use this program to define the SIP
Extension presented Caller ID
information.
0 = Request URI
1 = To Header
(default = 0)
3
84-20-05 SIP Extension Basic Information
Setup – Expire Value of Invite
Use this program to define the time
out response value for SIP invite.
0~256 (seconds)
(default = 180 seconds)
3
84-26-01 IPL Basic Setup – IP Address Assign the IP address for each DSP
on the IPLA.
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
3
84-26-02 IPL Basic Setup – RTP Port
Number
Assign the RTP port number to be
used for each DSP on the IPLA.
 Only even numbered ports are
supported.
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3