UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 1 - 3
Feature Access, Single On/Off, or One-Touch Keys
Keys are designated Feature Access, Single On/Off, or One-Touch throughout this
manual. The keys operate much the same, but various limitations imposed on each
type are described below.
Feature Access Keys
Depending on the type, a Multiline Terminal can have 2, 8, 16, 24, or 32 line
keys. These highly-flexible keys can be used for station DSS/BLF and Speed
Dial.
Single On/Off Keys
Line keys may also be assigned as Single On/Off keys in System Programming
to toggle a feature on/off. This assignment has no impact on the Feature Access
keys, but the assigned features are very specific. Scrolling (CID) and headset,
are examples of features available for Single On/Off keys.
One-Touch Keys
One-Touch keys can perform the same function as Feature Access keys. A
Multiline Terminal has a fixed number of these keys. No system assignment is
necessary, and the number of keys ranges from none to 16 depending on the
terminal type.
Figure 1-2 Feature Access/One-Touch Key Assignment Example
To Next Page
Loading...
