UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 139
Call Forwarding – Centrex
Description
The Call Forwarding – Centrex feature allows a station to forward an incoming PBX/Centrex CO call to an
outside location using the same PBX/Centrex CO line to free the line for additional use.
Call Forwarding – Centrex supports the following:
Call Forward – Immediate
Call Forward – Busy
Call Forward – No Answer
Call Forward – Busy/No Answer
Conditions
Call Forwarding – Centrex calls transferred from another station are forwarded when the
transferred Trunk is assigned as PBX in Program 14-04-01.
The following incoming calls follow Call Forwarding – Centrex when the incoming trunk is a
PBX/Centrex trunk:
DIT/ANA
Station Transfer
Automated Attendant Transfer
DISA Calls
Call Forwarding – Centrex is not supported for Call Forward Both Ring Split.
A maximum of 24 digits can be assigned in the destination for Call Forwarding – Centrex.
When a trunk is set to CTX/PBX, and is set for Call Forwarding – Centrex to an incorrect
number, the call recalls and follow CO incoming ringing (i.e., DIL, Normal Ring Group
Programming).
When Call Forwarding – Centrex is set and all trunks are changed in PRG 14-04-01 from
PBX to Trunk, Call Forward is cleared from memory.
When DND and any Call Forwarding – Centrex is set, the call forwards immediately.
Call Forwarding – Centrex does not follow the Code Restriction of the stations.
Default Setting
Disabled
To Next Page
Loading...
