NEC Univerge SV8100 - Default Setting

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 535
Conditions
 Timer Classes are used for CAR/VE also.
 When Timer Class is set to 0 it uses the system-wide timers.
 All stations and trunks are assigned to Timer Class 0 at default.
 Both system-wide timers (Timer Class 0) and Timer Class timers (Timer Class 1~15) can be
used in the same system.
Default Setting
Timer Class set to 0 for all trunks and extensions.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
None
25-07-10 20-31-22 DISA External Paging Time This is the maximum length of an External Page
placed by a DISA caller. If the Page continues
longer than this time, the system terminates the
DISA call. Trunk Timer Class is referred.
31-01-02 20-31-23 Page Announcement
Duration
This timer sets the maximum length of External
Page announcements. Station or Trunk Timer Class
is referred by the caller makes announcement.
Timer
Class 0
Timer
Class 1~15
Title Comment