NEC Univerge SV8100 - Page 558

Issue 1.0 UNIVERGE SV8100
2 - 534 Flexible Timeouts
22-01-06 20-31-09 DID Ring-No-Answer Time In systems with DID Ring No Answer Intercept, this
time sets the Ring No Answer time. This time is how
long a DID call rings the destination extension
before rerouting to the intercept ring group. Trunk
Timer Class is referred by DID trunk.
24-01-01 20-31-10 Hold Recall Time (Non
Exclusive Hold)
A call on Hold recalls the extension that placed it on
Hold after this time. Station Timer Class is referred
by held call.
24-01-02 20-31-11 Hold Recall Callback Time
(Non Exclusive Hold)
A Hold recall rings an extension for this time.
Station Timer Class is referred by held call.
24-01-03 20-31-12 Exclusive Hold Recall Time A call on Hold recalls the extension that placed it on
Hold after this time. Station Timer Class is referred
by held call.
24-01-04 20-31-13 Exclusive Hold Recall
Callback Time
An Exclusive Hold Recall rings an extension for this
time. If not picked up, the call goes back on Non
exclusive Hold. Station Timer Class is referred by
held call.
24-01-06 20-31-14 Park Hold Time – Normal A call left parked longer than this time recalls the
extension that initially parked it. Trunk or Station
Timer Class is referred by held call.
24-02-03 20-31-15 Delayed Call Forwarding
Time
If activated at an extension, No Answer Call
Forwarding occurs after this time. Station Timer
Class is referred by the station sets No Answer Call
Forward.
24-02-04 20-31-16 Transfer Recall Time A transferred call recalls to the extension that initially
transferred it after this time. Station Timer Class is
referred by transferred call.
25-07-02 20-31-17 VRS/DISA No Answer Time After this time expires, the call follows the
programmed Ring No Answer routing (Program 25-
03 and 25-04-01). Trunk Timer Class is referred.
25-07-03 20-31-18 Disconnect after VRS/DISA
Re-transfer to IRG
Disconnect after re-transfer to Incoming Ring Group.
Trunk Timer Class is referred.
25-07-07 20-31-19 Long Conversation Warning
Tone Time
Determine the time trunk-to-trunk conversation can
talk before the Long Conversation tone is heard.
Trunk Timer Class is referred.
25-07-08 20-31-20 Long Conversation
Disconnect Time
This timer determines how long the system waits
before disconnecting a trunk-to-trunk conversation
call after the Long Conversation tone is heard.
Trunk Timer Class is referred.
25-07-09 20-31-21 DISA Internal Paging Time This is the maximum length of an Internal Page
placed by a DISA caller. If the Page continues
longer than this time, the system terminates the
DISA call. Trunk Timer Class is referred.
Timer
Class 0
Timer
Class 1~15
Title Comment