UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 449
D
term
Cordless II Terminal
Description
The NEC D
term
Cordless II Terminal may be used with the UNIVERGE SV8100 KTS. The DTR-4R-1( )
TEL uses 900 MHz Digital Spread Spectrum (DSS) Technology and must be connected in tandem to a
multiline terminal.
The Dterm Cordless II cannot be used as standalone.
Press the applicable key on the Base Unit to Switch between cordless operation and multiline terminal
operation.
Conditions
When a message is received the icon is displayed.
When the RING OFF/ON switch on the right side is down the
OFF icon is displayed.
When the battery is low, the icon is displayed.
When there is no transmission between the Base Unit and the handset for about five
minutes, there are no LCD or LED indications on the cordless terminal handset. Ringing
off-hook or pressing keys resumes LCD and LED indications.
The ring pattern for the cordless terminal can be selected by system programming and
multiline terminals.
When a cordless terminal is ringing, press the flashing function key programmed for DSS to
answer the call.
Synchronous Ringing does not apply to the cordless terminals.
A beep indicates when the cordless terminal receives off-hook ringing.
Feature
D
term
Cordless II (DTR-4R-1( ))
Digital Technology 900 MHz Spread Spectrum
LCD 2-line, 16-digit LCD Display
Silent Alarm Yes
Dedicated Keys TALK, TRANSFER, HOLD, CONF, CHAN,
REDIAL, MUTE, R/VOL
Programmable Line Keys 4
Operational Range
50~350 feet
Message Waiting Indication
Icon
Headset Connection Yes
Channels 10
Determined by environmental conditions
To Next Page
Loading...
