NEC Univerge SV8100 - Sip Extension Basic Information Setup

Issue 1.0 UNIVERGE SV8100
2 - 626 IP Single Line Telephone (SIP)
SIP Extension Basic Information Setup:
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
84-20-01 SIP Extension Basic Information
Setup – Registrar/Proxy Port
Use this program to define SIP
station Proxy Port.
1~65535
(default = 5070)
3
84-20-02 SIP Extension Basic Information
Setup – Session Timer Value
Use this program to define the
periodic refresh time that allows
both user agents and proxies to
determine if the SIP session is still
active.
0~65535
(default = 180)
3
84-20-03 SIP Extension Basic Information
Setup – Minimum Session Timer
Value
Use this program to define to
convey the minimum allowed
value for the SIP session timer.
0~65535
(default = 180)
3
84-20-04 SIP Extension Basic Information
Setup – Called Party Info
Use this program to define the SIP
Extension presented Caller ID
information.
0 = Request URI
1 = To Header
(default = 0)
3
84-20-05 SIP Extension Basic Information
Setup – Expire Value of Invite
Use this program to define the
time out response value for SIP
invite.
0~256 (seconds)
(default = 180
seconds)
3
84-26-01 IPL Basic Setup – IP Address Assign the IP address for each
DSP on the IPLA.
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
3
84-26-02 IPL Basic Setup – RTP Port
Number
Assign the RTP port number to be
used for each DSP on the IPLA.
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
3
84-26-03 IPL Basic Setup – RTCP Port
Number (RTP Port Number + 1)
0~65534
Defaults:
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245
3