Issue 1.0 UNIVERGE SV8100
2 - 28 Alarm Reports
System Information
The system can print a report of the blades installed, the port assignments, and the port types. This
information is sent to the extension defined in Program 90-13.
The System Information Reports indicate:
Date and Time of the Report
Blade names
Slot condition (working, blocked)
Port assignment
Port classification
Table 2-2 Alarm Report Definitions
Alarm Report Heading Definitions
LVL Alarm Type (MAJ = Major, MIN = Minor)
NO Number of Alarm (4-digit)
STAT Status (REC = Recovered, ERR = Error, WAR = Warning
DATE Date the Alarm Occurred
TIME Time the Alarm Occurred
ITEM Name of the Alarm
UNIT Name of the Blade
SLT Chassis Slot Number
PRT Chassis Port Number
PARAMETER Related Information
Table 2-3 Alarm Report Item Definitions
Item Name Definition
PKG Installation Blade is removed or inserted.
ISDN Link ISDN Line failure is detected.
CD-CP00-AU – LAN Link CD-CP00-AU – Lan connection failure is detected.
Blocking Terminal Failure may have occurred because terminal
blocking is detected. Terminal is unplugged or wire is
disconnected.
System Data Change System Upgrade performed or Programming change.
System Start Up System is reset.
SMDR Link Connection failure has been detected between the
CD-CP00-AU and SMDR printer device.
To Next Page
Loading...
