UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 747
Multiple Trunk Types
Description
The UNIVERGE SV8100 supports many different Trunks in the system (DID, E&M Tie Lines, Loop Start,
Ground Start, ISDN BRI, ISDN PRI, and T-1 trunks). The system supports up to 200 trunks in the
expanded port package, and a maximum of 56 trunks in the basic port package.
DID
Refer to the Direct Inward Dialing (DID) feature for related information.
E&M Tie Lines
E&M Tie Lines (4-Wire) can be connected to the system to provide communication between remote
systems and facilities. The system can receive and/or transmit DTMF or DP signals on E&M Tie Lines.
Ground Start Trunks (US Only)
Ground Start Trunks can be connected to the system. Ground and Loop Start Trunks can be mixed in the
system per trunk. Ground Start Trunks are provided with line supervision to reduce call collisions.
Loop Start Trunks
Loop Start Trunks can be connected to the UNIVERGE SV8100 system. Loop Start is assigned per trunk
at the associated blade. Ground Start and Loop Start Trunks can be mixed in the system per trunk.
ISDN BRI
Refer to the ISDN Compatibility on page 2-655 feature for related information.
ISDN PRI
Refer to the ISDN Compatibility on page 2-655 feature for related information.
T-1 Trunks (US Only)
Refer to the T1 Trunking (with ANI/DNIS Compatibility) on page 2-1067 feature for related information.
Conditions
Each CD-4ODTA supports four 4-wire E&M Tie Lines.
Ground Start Trunks do not support Caller ID.
Default Setting
None
To Next Page
Loading...
