NEC Univerge SV8100 - Table 2-8 LED Flash Patterns

Issue 1.0 UNIVERGE SV8100
2 - 386 Direct Inward Dialing (DID)
2. Dial the Dial-In Mode Switching Service Code (Default = Not assigned).
- OR -
Press the Dial-In Mode Switching Programmable Function key (Program 15-07-01, 88, or SC 751
Key Code 88).
3. Dial 1~100 (table number).
4. Dial the Time Pattern 1~8.
Table 2-8 LED Flash Patterns
Time Pattern LED Appearance
Pattern 1 Off
Pattern 2 On
Pattern 3 Slow Flash
Pattern 4 Fast Flash
Patterns 5~8 Off