NEC Univerge SV8100 - Page 649

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 625
84-19-31 SIP Extension CODEC
Information Basic Setup – DTMF
Payload Number
Use this program to define the
DTMF Payload Number.
96~127
(default = 96)
3
84-19-32 SIP Extension IP CODEC
Information Basic Setup – DTMF
Relay Mode
Use this program to define the
DTMF Relay Mode.
0 = Disable
1 = RFC2833
(default = 0)
3
84-19-33 SIP Extension IP CODEC
Information Basic Setup –
Number of G.722 Audio Frames
Use this program to define the
number of Audio Frames for G.722
CODEC.
1~4
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
(default = 3)
3
84-19-34 SIP Extension IP CODEC
Information Basic Setup – G.722
Voice Activity Detection Mode
Use the program to define the
G.722 Voice Activity Detection
Mode.
0 = Disabled
1 = Enabled
(default = 0)
3
84-19-35 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (min)
Use this program to define the
minimum setting for the G.722 Jitter
Buffer.
0~160 ms
(default = 30)
3
84-19-36 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Average)
Use this program to define the
average setting for the G.722 Jitter
Buffer.
0~160 ms
(default = 60)
3
84-19-37 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Max)
Use this program to define the
maximum setting for the G.722
Jitter Buffer.
0~160 ms
(default = 120)
3
84-19-38 SIP Extension IP CODEC
Information Basic Setup –
Number of G.726 Audio Frames
Use this program to define the
number of G.726 Audio Frames.
1~4
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
(default = 3)
3
84-19-39 SIP Extension IP CODEC
Information Basic Setup – G.726
Voice Activity Detection Mode
Use this program to define the
G.726 Voice Activity Detection
Mode.
0 = Disabled
1 = Enabled
(default = 0)
3
84-19-40 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (min)
Use this program to set the
minimum setting for the G.726 Jitter
Buffer.
0~160 ms
(default = 30)
3
84-19-41 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Average)
Use this program to define the
average setting for the G.726 Jitter
Buffer.
0~160 ms
(default = 60)
3
84-19-42 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Max)
Use this setting to define the
maximum setting for the G.726
Jitter Buffer
0~160 ms
(default = 120)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3