UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1015
Guide to Feature Programming
The Level 1, Level 2 and Level 2 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-12-03 CD-CP00-AU Network Setup –
Default Gateway
Define the default gateway to be
used by the IPLA interface .
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3
10-12-09 CD-CP00-US Network Setup – IP
Address
Set for IPLA. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
3
To Next Page
Loading...
