NEC Univerge SV8100 - Page 1056

Issue 1.0 UNIVERGE SV8100
2 - 1032 SV8100 NetLink
 The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-12-03 CD-CP00-AU Network Setup –
Default Gateway
Define the default gateway to be
used by the IPLA interface.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3
10-12-09 CD-CP00-US Network Setup – IP
Address
Set for IPLA. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
3
10-12-10 CD-CP00-AU Network Setup –
Subnet Mask
Use this program to define the
Media Gateway Subnet Mask
Address.
128.0.0.0
192.0.0.0
224.0.0.0
240.0.0.0
248.0.0.0
252.0.0.0
254.0.0.0
255.0.0.0
255.128.0.0
255.192.0.0
255.224.0.0
255.240.0.0
255.248.0.0
255.252.0.0
255.254.0.0
255.255.0.0
255.255.128.0
255.255.192.0
255.255.224.0
255.255.240.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
(default = 255.255.0.0)
3
51-01-01 Net-Link System Property Setting
– Net-Link System ID
This is the ID of each Net-Link
system. Setting should insure that
no overlap occurs between nodes.
0~50
(0 = No operation)
(default = 0)
3