UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1069
If the number of ports are changed for a fractional T-1 in Program 10-03-06, the trunk ports
could be reassigned if the numerical sequence would split or it could fit into an empty gap of
trunk ports.
Examples:
The CD-4COTC with PZ-4COTG is assigned for trunk ports 1~8 and 17~24 and the T-1 (12
ports) was assigned as ports 25~36, the number of T-1s change to eight ports instead of 12.
The new trunk port numbers are assigned as 9~16 because the eight ports can fit into the
gap between ports 8 and 17 without splitting the numerical port number sequence.
The CD-4COTC with PZ-4COTG is assigned for trunk ports 1~8 and 17~24 and the T-1
(eight ports) was assigned as 9~16 and then the T-1 was changed from eight to 12 ports.
The new trunk port numbers are assigned as 25~36 because the port number sequence
would have to be split in order to keep them within the original number sequence (9~16) and
splitting the numerical port number sequence is not supported.
Default Setting
Disabled
System Availability (US Only)
Terminals
All Stations
Required Component(s)
CD-PRTA
Locally provided CSU/DSU
Required Software
None
To Next Page
Loading...
