NEC Univerge SV8100 - Page 1097

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1073
20-09-01 Class of Service Options
(Incoming Call Service) – Second
Call for DID/DISA/DIL/E&M
Override
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
 With this option set to 1, the
destination extension must be
busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
Turns Off (0) or On (1) the Caller ID
display at an extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-01 Class of Service Options for
DISA/E&M – First Digit
Absorbtion (Delete First Digit
Dialed)
For Tie Lines, Enable or Disable
the ability to absorb (ignore) the
first incoming digit. Use this to
make the tie trunk compatible with
3- and 4-digit Tie Line service. This
option does not apply to DISA.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
This option Enables or Disables a
DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group Access
This option Enables or Disables a
DISA or tie trunk caller’s ability to
access trunk groups for outside
calls (Service Code 704).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dial
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the System Speed Dialing.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
This option Enables or Disables a
DISA or tie trunk caller’s ability to
dial 0 for the telephone system
operator.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system Internal
Paging.
0 =Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-07 Class of Service Options for
DISA/E&M – External Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system External
Paging.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3