UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1081
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Operation
To set up Tandem Ringing:
1. Press Speaker at the extension considered to be the master telephone (optional).
2. Press the Tandem Ringing key (Program 15-07 or SC 751: 80).
3. Dial 1 to set the feature.
4. Enter the extension number to be considered the slave telephone (the telephone that rings when the
master extension rings).
A confirmation tone is heard (if Speaker was used).
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-11-41 Service Code Setup (for Setup/
Entry Operation) – Tandem
Ringing
Define a service code to be used to
set up Tandem Ringing.
MLT, SLT
(default not assigned)
3
15-07-01 Programmable Function Keys Assign a function key for Tandem
Ringing (code 80).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
30-03-01 DSS Console Key Assignment Assign a DSS function key for
Tandem Ringing (code 80).
Key Number
001~500
0~99 (General Functional
Level)
97 = Door Box Access
key (additional data: 1~8
Door Box No.)
00 ~ 99
(Appearance
Functional
Level)
3
To Next Page
Loading...
