UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1097
5. Press Hold.
6. Hang up.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key or #9 plus the trunk number +
the service code set for Forced Trunk Disconnect in Program 11-10-26).
Continue/Disconnect Codes
To use the Continue code to extend a Tandem Trunk call:
1. An external call connects to an external number either by transferring with Tandem Trunking or by
DISA caller.
2. After the programmed time (Program 24-02-07), a warning tone is heard and the user dials the
Continue code (Program 20-28-01) to extend the conversation.
3. After the programmed time (Program 20-28-03), the warning tone is heard again. After the
programmed time (Program 24-02-10), the call is disconnected.
To Next Page
Loading...
